|
|
1. Start by attaching the pads to the lead ends of the output cords. 2. Remove the top back cover and insert a 9 volt battery. Replace the cover once the battery is properly inserted. 3. Remove and save the protective film covering the self-adhesive pads provided with the massager. 4. Add a few drops of water with your fingers to each pad, this will help with adhesion and optimum sensation. 5. Place the massage pads, while still moist, on the area(s) where the massage sensation is desired. As a general rule of thumb if you have a muscle or joint that is hurting, put the pads on or around the area always making sure both pads are on muscles. 6. You are now ready to attach the plug-in connector to the unit. 7. Press the ON/RUN button on the massager. 8. Press ON/RUN and this will place the massager in RUN MODE and the virtual massage sensation will begin. 9. You may now use the MODE button to select one of the sensations:
10. You may also choose the intensity of the massage sensations by simply turning the intensity dials. Maintenance and Care
• Applying a few drops of water with the fingers prior to and directly after each massage session will maintain optimum performance and cleanliness of the massage pads. Also make sure to keep the protective films on the pads and store the pads in their zip lock bags so they don't dry out. Precautions
• Do not apply the massage pads near the heart, on the head, above the neck, in the pubic region, over scarred areas, on the throat or in the mouth. |
| 801-937-2795 (fax) sales@milmacinc.com Please call between the hours of: 9:00 a.m to 6:00 p.m. (Central Time) Copyright ©2008 All rights reserved Design by Larry L. Miller your one stop source for SEO and WEBsite Services |